Copic Part 3

For my last installment on blending copics, I'm going to talk about blending using a pallet.

Using a pallet to blend colors is a lot like using the tip-to-tip process. The only difference is instead of placing colors directly onto the tip, you place them on a pallet first. You can use any plastic non-porous surface; like a transparency or a old cd jewel case.
So why would you want to use a pallet instead of just going for the tip-to-tip? Well, if you're going to be working in a larger area, or if you want to blend more than one color together then using a pallet makes life easier.

Here is a photo of my pallet--an old cd case--I took my makers and colored onto the surface to create spots of color.

Take the lighter color that you want to blend with and use it to pick up the color and then color just like you would using the tip-to-tip method.
If you want to blend two colors together with a third, take the 2 darkest, and color on top of one another on the pallet and then pick up the color using the third.
You always want to pick up using your lightest color. And when you're done, color off the marker on a piece of scrap paper to clean the nib.
Take a look at my sample:
For the body I used YG13, to pick up the other colors, E37, G17and E49. For the horns I used the blending contrasting color technique. And for the teeth, I used the colorless blender to pick up the W7 from the pallet and blend into white. I then went over the teeth with Y00.

Hopefully, in the next couple of days, I'll post some stuff on using the copics for airbrushing! In the meantime, if you have any questions, please feel free to email me, by clicking on the contact me button to the right.

Copic Tutorial Part 2

Continuing on my discussion of copics that I started yesterday, here's some more info on blending.

When you want to blend several colors together there are a couple of different ways to do it. The first way, tip touching, which I talked about yesterday, is good for small sections. But if you want to blend into something a bit larger then you might want to try a different technique.

For blending in the same color family, I recommend gradation blending. Now, a good way to tell if you have colors that will work well together for this is by looking at the letter/number classification. You want colors that have the same letter and first number (which is color classification and brightness) and then try not have more than a two number difference between the second numbers. For example, b11, b13, and b14 would work wonderfully.
But it's not a hard and fast rule. Experimenting is the name of the game.
Take a look at my sample:

For the first step, color with your lightest, working in small circles and saturating the paper fully. Then while the first color is still wet, go in with the second and work up to 3/4 of the way. Right away, go back over with the lightest color to blend the colors together. Then go in with the darkest color and work up to the bottom 1/4. Go over it with the second darkest color and blend up, and then again with the lightest and blend up.
This technique took me a bit to get down, so practice, practice, practice!

Now onto blending contrasting colors!

There really is no rule for what contrasting colors work well together. But you do need to remember your basic color rules--since the two colors will be overlapping, they will make a third color where they meet. So if you use red and blue, you will have a little purple spot in the middle. This is especially true for the lighter colors. Just bear that in mind, if you don't want a big brown spot in the middle of your color blend!

Take a look at my sample:

You want to start with your lightest color and work in one direction, moving in straight lines, lifting slightly at the end of each stroke so that the color is slightly lighter. Don't worry about getting good saturation at this point, just get a good base coat. You want to go to about 3/4 of the space. Now come in with your contrasting color and do the exact same thing but in the opposite direction, covering to the 3/4 mark in the opposite direction. Now go back in with the first color and repeat. Then do the same with the second color. Keep going over it, until it's blended.

Hopefully, I will be able to get part three up tomorrow!

Copic Markers Tutorial

As promised, here is the first of my copic markers tutorials.

So let's start out with some basics. When I first looked at the copics, I had no idea what those crazy letters and numbers used to categorize them meant. Here's what they look like:
The letters stand for the color category--e for earth tones, b for blue etc. The numbers relate to the shades. The first number tells you how much gray is in the color 0 being none, and 9 being a lot. The lower the number the brighter the color. The second number relates to the darkness of the color. The higher the number the darker the color. If you have a RV09, it will be a bright deep red, while a rv99 will be a duller gray deep red. Understanding the number/letters is important when it comes to blending--since it's easier to blend within a color family.

Now for some coloring:
When it comes to using the markers it's important to remember that they are alcohol based--which is why they are low toxicity--but the alcohol causes them to dry quickly. To get an even color distribution it's important really saturate the paper. The best way to achieve this is to color in small circles. When you work with more than one color for shading, you'll get smoother effects if you start with a well saturated base.

One of the best features of these markers is that it;s impossipble to contaminate the tips. If you get one color on a nib of another, simply color it off on a scrap piece of paper.

Tip-to-Tip blending:
Since there's no risk of color contaminating you can blend in small areas by touching the tip of one color, to the tip of another and then coloring with it. You should always color with your lightest color.
Take a look at some examples:

The larger circles were done with R32 and a blender pen. I touched the pink to the pen and colored in small circles working up to the top so that's pink into white. While it was still wet, I gently went in with the r32 on the bottom end and blended it some more. When I was done, I colored off the blending pen and it was nice and clean.
This is a great technique for small areas, take a look at the little circles, I blended r32 with y21 using the tip to tip method.

Tomorrow, I'll post some more blending tutorials.