Wednesday Stamper

The theme for this week's Wednesday Stamper is stripes and since I don't have any stripped stamps, I made this using my handy dandy ink blending tool! The Laughter stamp is by Hero Arts and the clown is a Zettiology stamp. For step-by-step instructions on making the stripes, scroll on down this post!

To do this project you will need glossy cardstock, ink blending tool (or make-up sponges which can be used for stazon/glossy cardstock combination), Stazon inks in various colors and painter's tape.


Take strips of painters tape and mask off the glossy cardstock. Like so:

Using your ink blending tool, ink up and then ink the cardstock. You want to pull it in straight lines and not in circles. Here is what it will look like:

Then, remove the tape and you will be left with little stripes.
You can then re-lay new tape down, covering the stripes and repeat the previous steps with a different color.

Here it is with two colors.
And with three....

If you really want to get wild, you can lay the tape, stamp and then ink. I like to use two different shades of the same color, like light brown and dark brown. Here is what it looks like with the tape still on:

Pull up the tape and viola!

If you have any questions you can always email me, by clicking the link up above.

A couple more ink blending cars

I made a couple more ink blending tool cards (to see my demo click here). Both of the stamps are by Paperbag studios. The first card I blended chalk ink in three different colors. Instead of leaving the center clear, I worked straight across. I like the look of the chalk inks, but it does lacks the pop of the distress inks.
For this one I used pink distress inks and followed the same pattern I did in the demo, but before I attached the center picture, I spritzed the card with some water to create some spots. If you look closely, you can see them.

Wednesday Stamper

The theme for this week's Wednesday Stamper is insects. So I pulled out my dragonfly stamp by Stamper's Anonymous and made this:

I used the ink blending technique I talked about the other day, except I worked the ink all the way across. When it was dry I spritzed it with some ink mixed with water and pearl ex powder to give it a little sparkle. Of course, it didn't show up very well in the scan, since my scanner doesn't like metallic things. But you can see the green spots.

Ink Blending Tool How-To

Here is my promised ink blending tutorial.
I have to say that when Inkessentails came out with the blending tool, my response was a not so enthusiastic "eh." I had ink "daubers" and didn't really see the point of buying yet another one. But then, I saw a sample of work that had been done with it and I went from "eh" to "oh my!" It's now become one of my favorite tools.
Here's the supply list for this project: three colors of ink, one of which should be light, one dark and one brown or black (I am using distress inks: tea dye, pine needles and walnut stain) ink blending tool and three blending foams (these are re-usable and last a really long time so don't start stressing about the cost of buying a ton of these little foams), something to protect your work surface, your inking surface and stamps.

Start with your lightest color and ink up your foam using a pouncing motion (the foam should be on the applicator, I know that sounds like a silly reminder, but I've actually forgotten to put it on a couple of times.)

Starting off of the paper, drag the blending in small circles onto the paper. You want to use a light touch and then press harder as needed. Remember, it's easy to add color, impossible to subtract!

Do this all around the edges of the card leaving the middle circle empty. This provides a nice visual focal point and gives it a little pop.

Now, using the same off the paper technique do the same with the darker color (remember to change your foam before you start!) You only want to come in a little, leaving the lighter color still showing.

Now take your dark brown or black and ink-up a new foam. Instead of working in circles this time, place the blender just on the edge of the paper and pull back off onto your craft mat/work surface protector. You can also pick the paper up and swipe the edge with the color.

Now, you're ready to add some stamps. I like to do a couple of stamps around the outside leaving the inside blank for the focal stamp.

Then, I stamp on a separate piece of paper and using the lightest color ink it as in step one, and then using the brown/black ink the edges. This echos what's going on the card and helps the image to feel like it belongs. You can always skip this and just stamp right into the center, but I like the look of the third image on top.

Then attach to your card and you're all finished!

The stamps I used here were by paper bag studios (the girls and the script) and inkadinkado for the swirls.
If you have any questions about the technique, or if one of my steps wasn't clear, please feel free to email me.

Men ATCs

I know, I've been gone a long time.
Sigh.
I've been having some health issues and in between being poked and prodded by various doctors and battling my insurance company (who seem to feel that being human is a pre-existing condition)I just haven't had much energy to do much posting.
But I did manage to get my ATCs done for the swap on Saturday. The theme this month is Men; mostly because we did women last month.
Here are my cards:

I used this really wonderful technique and the Ranger ink blender tool to make the backgrounds. (For which I will post a tutorial some time this week, scouts honor.) The orange and blue background stamps are both by Paperbag Studios, the green is by Inkadinkado, and the purple is by Rhonna Ferrar. I used some alcohol inks on the buttons to get that lovely aged look.
All in all, I'm happy with the way they turned out.